ESP32-H2 Supermini device with ST7789 TFT display and connected BME280 sensor

Getting started with a BME280 environment sensor connected to an ESP32-H2 Supermini device and a TFT display with driver chip ST7789.

This is the accompanying repository for my article "Getting started with a BME280 environment sensor connected to an ESP32-H2 Supermini device and ST7789 TFT display": https://medium.com/@androidcrypto/getting-started-with-a-bme280-environment-sensor-connected-to-an-esp32-h2-supermini-device-and-829eaff9f46d.

My display is a 2.0 inch large TFT display with 240 x 320 pixels.

Settings for the display specific setup file

I'm using a display specific setup file for the combination ESP32-H2 Supermini with TFT display driver ST7789. This file contains e.g. the display driver, size and pins for the ESP32-device. If your display has a different size please change the height and width accordingly.

Copy a file to the User_Setups folder

Please copy the file

Setup703_H2_SM_ST7789_240x320.h

to the User_Setups folder.

Edit the User_Setup_Select.h file

You need to place the following line in the root folder's "User_Setup_Select.h" file

#include <User_Setups/Setup703_H2_SM_ST7789_240x320.h> // ESP32-H2 Supermini, 80 MHz

Second: please comment all other "#include..." entries like this, especially the "//#include <User_Setup.h>" entry.

// Example User_Setup files are stored in the "User_Setups" folder. These can be used
// unmodified or adapted for a particular hardware configuration.
#ifndef USER_SETUP_LOADED //  Lets PlatformIO users define settings in
                          //  platformio.ini, see notes in "Tools" folder.
///////////////////////////////////////////////////////
//   User configuration selection lines are below    //
///////////////////////////////////////////////////////
// Only ONE line below should be uncommented to define your setup.  Add extra lines and files as needed.
//#include <User_Setup.h>                       // Default setup is root library folder
// Setup file in folder Arduino/libraries (updates will not overwrite your setups)
#include <User_Setups/Setup703_H2_SM_ST7789_240x320.h> // ESP32-H2 Supermini, 80 MHz

Important note

You need to modify the display library TFT_eSPI to get the code to work. Please find instructions on how to do this in my forked TFT_eSPI repository here on GitHub: https://github.com/AndroidCrypto/TFT_eSPI.